Tag: Over-Drying Prevention

Preventing Over-Drying of Granules During Fluid Bed Processing

Posted on By Admin

Preventing Over-Drying of Granules During Fluid Bed Processing Preventing Over-Drying of Granules During Fluid Bed Processing Introduction: Fluid bed processing is a cornerstone of pharmaceutical manufacturing, especially in the production of solid dosage forms such as tablets. The process involves suspending particles in a flowing gas stream, typically air, which facilitates the drying of granules…

Read More “Preventing Over-Drying of Granules During Fluid Bed Processing” »

Solid Dosage form, Tablets

Preventing Over-Drying in Coated Tablets During Curing Stages

Posted on By Admin

Preventing Over-Drying in Coated Tablets During Curing Stages Preventing Over-Drying in Coated Tablets During Curing Stages Introduction: Coated tablets are a mainstay in the pharmaceutical industry, offering benefits such as controlled release, taste masking, and enhanced stability. However, one of the critical stages in the production of coated tablets is the curing process, which aims…

Read More “Preventing Over-Drying in Coated Tablets During Curing Stages” »

Solid Dosage form, Tablets

Preventing Over-Drying of Hygroscopic Tablets in Fluid Bed Dryers

Posted on By Admin

Preventing Over-Drying of Hygroscopic Tablets in Fluid Bed Dryers Preventing Over-Drying of Hygroscopic Tablets in Fluid Bed Dryers Introduction: In the pharmaceutical industry, maintaining the integrity and efficacy of tablet formulations is of paramount importance. Hygroscopic tablets, known for their moisture-attracting properties, present unique challenges during the drying process. Fluid bed dryers, a common tool…

Read More “Preventing Over-Drying of Hygroscopic Tablets in Fluid Bed Dryers” »

Solid Dosage form, Tablets