Ointment & Cream Defects – Page 2

Tube leakage during transfer – formulation vs process investigation

The first step in investigating tube leakage during transfer is recognizing the signals indicating a problem. Symptoms may vary but commonly include:Click to read the full article.

Texture non-uniformity during homogenization – formulation vs process investigation

Identifying texture non-uniformity requires keen observation and testing at several stages during production. Key symptoms indicating potential issues include:Click to read the full article.

Phase separation observed during stability studies – CAPA failure explained

Identifying the symptoms of phase separation is the first step in addressing manufacturing defects. Symptoms may be observed visually during the stability testing of formulations. Common signals include:Click to read…

pH drift during homogenization – formulation vs process investigation

The first step in addressing pH drift during homogenization is recognizing the signals that indicate a problem. Common symptoms include:Click to read the full article.

Tube leakage during homogenization – formulation vs process investigation

The detection of tube leakage during homogenization can manifest in various ways, including:Click to read the full article.

Air entrapment defect during transfer – CAPA failure explained

Identifying the symptoms of air entrapment defects is the first step towards rectifying potential manufacturing issues. Key indicators may include:Click to read the full article.

Phase separation observed after bulk hold – inspection readiness risk

Understanding the symptoms or signals that indicate phase separation is critical for timely investigation. Some common observable symptoms include:Click to read the full article.

Tube leakage during homogenization – inspection readiness risk

Identifying tube leakage during homogenization can be crucial for maintaining product quality. Common symptoms observed on the manufacturing floor or in the laboratory include:Click to read the full article.

Microbial contamination after bulk hold – CAPA failure explained

Identifying symptoms of microbial contamination is critical for prompt action. Here are the primary signals that may indicate contamination in ointments and creams during or after a bulk hold:Click to…

Air entrapment defect after bulk hold – CAPA failure explained

Identifying the symptoms of an air entrapment defect is the first step in the investigation process. Symptoms may manifest in various forms, including:Click to read the full article.

Microbial contamination after bulk hold – inspection readiness risk

Identifying the symptoms of microbial contamination is critical. Symptoms may manifest as:Click to read the full article.

pH drift after packaging change – inspection readiness risk

Identifying symptoms of pH drift is crucial for timely intervention. Key signals include:Click to read the full article.